Cartridge Filter Systems

Complete Filtration Solutions

Useful for Pre Filtration Stage in Water and Waste Water Industry. As a Polishing Filter in Oil & Petro Chemical Industry. Application fluid with less quantity of available suspended solid load within and fine filtration requirement, i.e. ≤ 25 micron, tends to the selection of Cartridge Filter System.

This system might be containing 01 no. of 52 mm / 2.5” OD x 5” / 10” Long Cartridge to 200 Nos. of 2.5” / 6” OD x 40” / 60” Long Filter Cartridges. The selection of Filter Cartridge in terms of Material Type / Construction type / Fitment / in Quantity is with respect to Type of application fluid, Rate of flow to the filter, Filtration Rating etc.

Available in Material of Construction

Mild Steel, Carbon Steel, IS 2062
SS Gr. – SS 304, SS 316, SS 316 L, Duplex SS 2205, etc.
With Rubber Lining
With PTFE Coating
FRP / GRP (Fiber Reinforced Polymer)
UPVC
Polypropylene

Available End Connection

Flanged Connection – ANSI / ASME B 16.5, SORF / SOFF / FF Connection
Threaded Connection – BSP, NPT
Tri Clover Clamp
Union Connection

Design Detail

ASME Design Code
With U Stamp, UM Stamp, R Stamp, NB Certification
With CE Certification / EN Standard
Good Engineering Practice

In Water & Waste Water Industry

Designed with different kinds of filter cartridges, like

PP Spun Bonded / Melt Blown Filter Cartridges

Available Sizes are,

2.5” OD x 10” / 20” / 30” / 40” / 60” Long
4” / 4.5” OD x 10” / 20” Long

Available Fitment

DOE (Double Open End) Type
SOE (Single Open End) Type – With One End open and another closed through flat surface OR Fin / Bayonet design
Two O – Ring with Adapter Fitment (226 / Code 7 Design)
Push Fit (222 / Code 3 Design)

PP / Cotton / Glass Fiber String Wound Filter Cartridges

Depend upon Operating Temperature, selected media – PP / Cotton / Glass Fiber thread wounded on PP / SS perforated core with DOE (Double Open End) fitment filter cartridges are useful.

Available Sizes are,

2.5” OD x 10” / 20” / 30” / 40” Long
4” / 4.5” OD x 10” / 20” Long

Hi flow Filter Cartridges

Available Size are,

4” / 6” OD x 10” / 20” / 30” / 40” / 60” Long

Available Fitment

SOE (Single Open End) Type – With One End open with O – Ring and another end closed

SS Gr. Wire Mesh Filter Cartridges

Two Types of configuration are available with SS Gr. – SS 304, SS 316, SS 316 L, Duplex SS 2205 etc. Wire Mesh filter cartridge

Useful to fulfil from Coarse filtration to Fine filtration requirement, i.e. From 2000 Micron to 2 Micron.

4.1 Wire Mesh Wrap Round Filter Cartridges

Available Size are,

2.5” OD x 10” / 20” / 30” / 40” / 60” Long
4” / 4.5” OD x 10” / 20” Long
Customised Size

Available Fitment

DOE (Double Open End) Type
SOE (Single Open End) Type – With One End open and another closed through flat surface OR Fin / Bayonet design
Two O – Ring with Adapter Fitment (226 / Code 7 Design)
Push Fit (222 / Code 3 Design)
Threaded connection

4.2 Wire Mesh Pleated Filter Cartridges

In case to increase the Filtration Area, Wire mesh pleated configuration is applicable.

Available Size are,

2.5” OD x 10” / 20” / 30” / 40” / 60” Long
4” / 4.5” OD x 10” / 20” Long
Customised Size

Available Fitment

DOE (Double Open End) Type
SOE (Single Open End) Type – With One End open and another closed through flat surface OR Fin / Bayonet design
Two O – Ring with Adapter Fitment (226 / Code 7 Design)
Push Fit (222 / Code 3 Design)
Threaded connection

In Pharma, Dairy, Food & Beverages Industry

Specifically Hygienic designed (No fluid remaining after process completion is Hygienic design) for this industry requirement. Useful to fulfil Finer filtration, i.e. ≤ 1 Micron. With PP Spun Bonded and PP String Wound Filter Cartridges, here we are using

PP / PTFE / PES / Nylon / Polyester Pleated Filter Cartridges

Useful for absolute filtration requirement.

Available Size are,

2.5” OD x 10” / 20” / 30” / 40” / 60” Long
4” / 4.5” OD x 10” / 20” Long

Available Fitment

DOE (Double Open End) Type
SOE (Single Open End) Type – With One End open and another closed through flat surface OR Fin / Bayonet design
Two O – Ring with Adapter Fitment (226 / Code 7 Design)
Push Fit (222 / Code 3 Design)

SS Sintered Metal Powdered Filter Cartridges

In case of high temperature application and auto clave requirement, these cartridges are useful.

Available Size are,

2.5” OD x 10” / 20” / 30” / 40” Long
Customised sizes

Available Fitment

DOE (Double Open End) Type
SOE (Single Open End) Type – With One End open and another closed through flat surface OR Fin / Bayonet design
Two O – Ring with Adapter Fitment (226 / Code 7 Design)
Push Fit (222 / Code 3 Design)
Threaded Connection

In Oil & Gas, Refinery, Petro Chemical Industry

As per application and operational requirement, selected filter cartridges, i.e.

SS Sintered Multi Layered Filter Cartridge

SS Sintered Metal Fiber Filter Cartridge

Where, Operating temperature is main concern with the finest filtration (≥ 0.1 Micron) is requirement, these filter cartridge are useful.

SS Sintered Multi layered are available in SS 304, SS 316, SS 316 L Gr. Material. Also available with 3 layers, 5 layers, 7 layers etc. construction. SS Sintered Metal Fibers / Random fiber are available with inbuilt mesh support or external mesh support.

Available Size are

2.5” OD x 10” / 20” / 30” / 40” Long
Customised sizes

Available Fitment

DOE (Double Open End) Type
SOE (Single Open End) Type

Coalescing and Separation Filter Elements

When the application contains Water / Oil content with suspended solid load, Coalescers and separators are useful arranged within a single filter housing in compartmental design.

Available Size are,

2.5” OD x 10” / 20” / 30” / 40” Long
Customised sizes

Available Fitment

DOE (Double Open End) Type
SOE (Single Open End) Type

Resin Bonded Cellulose Melamine (RBCM) Filter Cartridge

For chemical Filtration, these filters mainly useful till 5 Micron filtration capacity.

Available Size are,

2.5” OD x 10” / 20” / 30” / 40” Long

Available Fitment

DOE (Double Open End) Type

Carbon Cartridge

To remove unwanted Odor and color, these filters are used mainly. Available in construction through

Activated Carbon Granules

Coconut Shell Carbon Granules

Available Size are,

2.5” OD x 10” / 20” / 30” / 40” Long

Available Fitment

DOE (Double Open End) Type

Sintered Ceramic Filter Cartridge

In old days, these cartridges were useful for RO Filtration. With grooved design to increase in filtration area, these filters are available with 5 Micron filtration capacity.

Available Size are: 2.5” OD x 10” / 20” / 30” / 40” Long

Available Fitment: DOE (Double Open End) Type