Bag Filter Systems

Against Process Filtration Requirement

Useful as a Polishing Filter in Oil & Petro Chemical Industry, Paint Industry, Automobile Industry, Textile Industry, Power Plant Industry. Application fluid with medium quantity of available suspended solid load within and coarser to fine filtration requirement, i.e. 200 Micron to 1 micron, tends to the selection of Bag Filter System. This system might be containing 01 no. of Size 1, Size 2, Size 3, Size 4 to 14 nos. of Size 2 Filter Bag.

Available in Material of Construction
  • Mild Steel, Carbon Steel, IS 2062
  • SS Gr. – SS 304, SS 316, SS 316 L, Duplex SS 2205, etc.
  • With Rubber Lining
  • With PTFE Coating
  • FRP / GRP (Fiber Reinforced Polymer)
  • UPVC
  • Polypropylene
Available End Connection
  • Flanged Connection – ANSI / ASME B 16.5, SORF / SOFF / FF Connection
  • Threaded Connection – BSP, NPT
  • Tri Clover Clamp
  • Union Connection
Design Detail
  • ASME Design Code
  • With U Stamp, UM Stamp, R Stamp
  • With CE Certification / EN Standard
  • Good Engineering Practice
Surface Finish Type
  • Mirror Polish
  • Acid Pickling & Passivation

Special Operational requirement, i.e. Iron particle removal with Magnetic Bar arrangement can be done with Bag Filter System

Process Filter Bag

For liquid filtration requirement of micron range from 1 micron to 200 micron and application with considerable amount of suspended solid load, these filter bags are useful.

Available Size are,
  • Size 1 = 7” OD x 17” Long
  • Size 2 = 7” OD x 32” Long
  • Size 3 = 4” OD x 10” Long
  • Size 4 = 4” OD x 17” Long
  • Size 5 = 6: OD x 20” Long
Available Fitment,
  • PP / PE / Nylon Collar Type
  • Spring Steel Ring Type
  • Snap Band Type
Available Media,
  • Non Woven Needle Felt (Polypropylene, Polyester)
  • Mono Filament (Polypropylene, Polyester)
  • Mesh Type (Nylon)
Wide Types of Operational Requirement,
  • Oil Absorbent Filter Bag
  • Water Adsorbent Filter Bag
  • Multi Layer Filter Bag
  • Carbon Filter Bag